TRANSMISSION
3. Install:
S shift fork "L" 1 and "R" 2
S drive axle assembly 3
S shift fork guide bar
S shift fork guide bar retainer 4
NOTE:
S Install shift fork "L" into the groove in the 6th
wheel gear and shift fork "R" into the groove in
the 5th wheel gear on the drive axle.
S Make sure that the drive axle bearing circlip a
is inserted into the grooves in the upper crank-
case.
4. Check:
S transmission
Rough movement ! Repair.
NOTE:
Oil each gear, shaft, and bearing thoroughly.
5-106
ENG
10 Nm (1.0 mSkg, 7.2 ftSlb)
LOCTITE