CHECKING THE FRONT AND REAR BRAKE PADS /
CHECKING THE FRONT AND REAR BRAKE HOSES
EAS00118
CHECKING THE FRONT AND REAR BRAKE
PADS
The following procedure applies to all of the
brake pads.
1. Check:
• front brake pad
• rear brake pad
Wear indicators
brake disc → Replace the brake pads as a
set.
Refer
to
BRAKE PADS" and "REPLACING THE
REAR BRAKE PADS" in chapter 4.
Brake pad wear limit
0.8 mm (0.032 in)
1.0 mm (0.039 in)
Front brake
Rear brake
EAS00131
CHECKING THE FRONT AND REAR BRAKE
HOSES
The following procedure applies to all of the
brake hoses and brake hose clamps.
1. Check:
• brake hose
Cracks / damage / wear → Replace.
2. Check:
• brake hose holder
Loose → Tighten the holder bolt
NOTE:
NOTE:
• Align the brake hose holder with the projec-
tion
on the front fork and clamp the brake
hose.
• Pass the brake hose behind the rib
front fork.
3. Hold the vehicle upright and apply the
brake several times.
4. Check:
• brake hose
Brake fluid leakage → Replace the dam-
aged hose.
Refer to "FRONT AND REAR BRAKES" in
chapter 4.
3-20
CHK
ADJ
or
almost touch the
"REPLACING
THE
FRONT
.
on the