Installing The Swingarm - Yamaha YZF-R1S Service Manual

SWINGARM AND DRIVE CHAIN
6. Check:
S drive sprocket
S rear wheel sprocket
More than 1/4 tooth a wear ! Replace the
drive chain sprockets as a set.
Bent teeth ! Replace the drive chain sprock-
ets as a set.
b Correct
1 Drive chain roller
2 Drive chain sprocket
EAS00711

INSTALLING THE SWINGARM

1. Lubricate:
S bearings
S spacers
S dust covers
S pivot shaft
2. Install:
S swingarm
S pivot shaft 1
S pivot shaft nut 2
3. Install:
S rear shock absorber assembly
S rear wheel
Refer to "INSTALLING THE REAR SHOCK
ABSORBER ASSEMBLY" and "INSTAL-
LING THE REAR WHEEL".
4. Adjust:
S drive chain slack
Refer to "ADJUSTING THE DRIVE CHAIN
SLACK" in chapter 3.
4-75
CHAS
Recommended lubricant
Lithium-soap-based grease
Drive chain slack
25 X 35 mm (0.98 X 1.38 in)