USE
2.4.3.
MULTIFUNCTION DIGITAL DISPLAY
CONTROLS
1 MODE pushbutton; to display and make adjustments
(works only when vehicle is stopped).
2 SCROLL pushbutton; to display and set all functions
except the time.
When you turn the ignition key to "
instrument panel lights will turn on for 3 seconds:
-
all warning lights;
-
Backlighting
-
All segments on the multifunction digital display.
After the first check routine, the multifunction display will
immediately indicate current battery charge, and then
display the measured values in the page that was active
before switch-off.
-
ODO
-
CURRENT SPEED (zone A)
-
ODOMETER (zone B)
-
GRAPHICAL REV COUNTER, with engine running
(zone C)
TRIP
TRIP configuration shows trip (partial) data.
To select TRIP configuration, press MODE if vehicle is
stopped, or press SCROLL if vehicle is running, and
ODOMETER indication will switch to TRIP.
2 - 20
", the following
SXV / RXV 450 - 550