CYCLE PARTS
5.2.2.
REMOVING THE FORK LEGS (RXV)
•
Loosen and remove the two front screws securing the
mudguard.
•
Loosen and remove the four screws securing the
mudguard.
•
Remove the front mudguard.
•
Place the front stand (OPT) in the fork bottom plate.
•
Loosen and remove the two screws securing the brake
caliper.
•
Remove the brake caliper.
NOTE The speed sensor cable is routed outside the brake
caliper and is fitted with a protection.
•
Working on the left side, loosen and remove the front
wheel shaft nut.
5 - 22
SXV / RXV 450 – 550