APRILIA SXV / RXV 450 550 Use And Maintenance Book page 191

SXV / RXV 450 – 550
• Working on the left side, partially tighten the front
wheel shaft nut.
NOTE To lock wheel shaft rotation tighten the two screws on
fork clamp, right side.
•
Working on the left side, tighten the front wheel shaft
nut.
•
Tighten the two screws on wheel shaft left fork clamp.
•
Position the brake caliper in its seat.
•
Tighten the two brake caliper screws.
•
Remove the front support (OPT), and place the vehicle
on the side stand, see (POSITIONING THE VEHICLE
ON THE STAND).
NOTE The speed sensor cable is routed outside the brake
caliper and is fitted with a protection.
•
Secure the sensor cable using a tie.
•
Fit the mudguard and tighten the four screws.
CYCLE PARTS
5 - 37