Christie DS+60 User Manual page 91

6. Discard the lamp using approved disposal methods for your area. NOTE: Lamps
containing mercury must be treated as hazardous waste if discarded in large
volumes.
Do not stick hands into an empty lamp compartment,
especially if the other lamp is still on. The lamp
compartment can become quite hot and cause physical
7. On the new lamp module, turn the
three lock screws to the "unlock"
position before inserting it into the
lamp compartment. Align the lamp
with the three pins located at the
back of the compartment. Insert the
lamp all the way in until it is fully
seated. (Figure 4.5)
8. Turn the three lock screws on the
new lamp module clockwise a
quarter turn to "lock" it in place.
(See Figure 4.4 for lock screw
position.)
9. Close the lamp door and tighten the
screw to secure it in place.
NOTE: The projector automatically detects a new lamp and records the serial number
in software the next time it's powered up. Manual entry of the serial number is not
required.
Figure 4.4.
WARNING
injury.
Figure 4.5.
Christie DS+60 User's Manual
Section 4: Maintenance
4-7