Christie DS+60 User Manual page 79

determines the rate of
Blend Shape
roll-off across the blend width, i.e.
how quickly the white levels
across the blend change from light
and dark. Increasing the Blend
Shape setting accelerates the rate
of change at both extremes so that
less of the region appears mid-
gray (see Figure 3.29.) Decreasing
the Blend Shape setting slows the
rate of change so that more of the
region appears mid-gray. For most
applications, this subtle control is
best left close to 50.
determines the white
Blend Midpoint
level at the blend midpoint (the point
equidistant between the beginning
and end of the blend). Increasing the
Blend Midpoint setting creates a
blend that appears brighter than the
rest of the image. Decreasing the
Blend Midpoint setting creates a
blend that is darker than the rest of
the image. A setting of 50 means the
midpoint is approximately 50%
black—for best results in most
applications, keep fairly close to this default.
Other Functions
For convenience, the Edge Blending submenu also includes related options for
enabling a specific color and/or test pattern, or for working with colors or the lamp.
Such functions duplicate those provided elsewhere in the menu system.
Edge Blending Procedure
NOTE: Before attempting to work with edge blending software functions, you must 1)
physically align the projectors/images by correctly overlapping the displays from your
intended external source, and 2) Match colors and Brightness Uniformity.
For a shared edge, all Blend procedures and settings
should be identical on BOTH projectors.
1. Start with 2 projectors. Display full white field test pattern from both.
2. In the Edge Blending submenu, enable Edge Blending by entering a checkmark in
the top checkbox.
3.
SET STARTING POINTS FOR ADJUSTMENT
Set all blend widths to 0.
Go to "More" and set everything in the Edge Blending (2) menu to 50.
Figure 3.29. "Shape" Examples
Figure 3.30. "Midpoint" Examples
IMPORTANT
:
Christie DS+60 User's Manual
Section 3: Operation
3-55