Christie DS+60 User Manual page 73

Figure 3.24. Copy X/Y Values into All Projectors
6. In each projector, judge by eye and adjust x/y coordinates slightly in the following
manner:
To match reds, decrease "
Red X" until full field red
screens match.
To match greens, decrease
"Green Y" until full field
green screens match.
To match blues, increase both
"Blue X" and "Blue Y" until
full field blue screens match.
NOTE: For speed, enable the
"Auto Color Enable" checkbox.
Each color coordinate you select
will then automatically trigger a
full field display of the
corresponding color.
These coordinate adjustments move the
three color points closer together (see
right) to establish a "shared" gamut
attainable by all projectors in your group.
Adjust only as necessary to ensure that the
resulting color palette is as large as
possible. When done, you may need to
adjust lamp power slightly.
7. All screens should now be color-matched. Apply this new "User" gamut to a
source at any time by selecting it in the "Select Color Adjustment" list accessed in
the Advanced Image Settings menu.
Section 3: Operation
Christie DS+60 User's Manual 3-49