Sea-doo GS5847 Operator's Manual page 85

Pre-Season Preparation Chart
NOTE: It is highly recommended that the dealer perform the annual safety in-
spection and factory campaigns in addition to the pre-season preparation all at
the same time.
Lubrication/corrosion protection
Battery condition/charging and reinstallation
Battery, starter connections and routing
Spark plug replacement
Jet pump oil inspection
Propulsion system inspection
Oil filter replacement
Fuel tank straps
Oil tank straps
Oil injection tank filling
Flame arrester inspection
Fuel filter replacement
Fuel line condition
Filler neck, fuel tank and fuel cap condition
Check valves, fasteners, fuel system pressurization
Throttle and choke cable inspection/adjustment
Oil injection pump adjustment and bleeding
Engine ignition timing
Fuel injection sensors verification (RFI)
Carburetor adjustment
Steering system adjustment/inspection
Reverse cable adjustment (if applicable)
Inspection of bailer pick-ups
Inspection of cooling system hoses
Monitoring beeper
Digitally encoded security system
Before installing new spark plugs, it is suggested to burn the excess BOM-
BARDIER LUBE lubricant by starting the engine using the old spark plugs.
Safety item covered in the annual safety inspection.
OPERATIONS
www.SeaDooManuals.net
To be performed by
OPERATOR
DEALER
DEALER
OPERATOR
DEALER
DEALER
DEALER
OPERATOR
OPERATOR
OPERATOR
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
DEALER
83