Sea-doo GS5847 Operator's Manual page 69

1
F01I0BY
1. Grease PTO flywheel
Secure PTO flywheel guard.
Seal Carrier
XP Limited
Using a grease gun, carefully lubricate
seal carrier of mid bearing until grease
is just coming out of seal.
1
F08I01Y
1. Grease seal carrier of mid bearing
Anticorrosion Protection
Throttle/Choke Cables
Lubricate the throttle and choke ca-
bles with BOMBARDIER LUBE lubri-
cant every 25 hours (or every 10 hours
in salt water use).
Electrical Connections
As necessary, apply anticorrosion
product such as dielectric grease on
battery posts and all exposed cable
connectors.
Do not lubricate connectors of
the Multi-Purpose Electronic
Module.
Additional Lubrication
BOMBARDIER LUBE lubricant will
help to prevent corrosion and keep
proper operation of moving mecha-
nisms.
Lubrication of the following items
should be performed every 50 hours
in fresh water use but every 10 hours
in salt water use.
Choke Lever
Fully pull choke lever and lubricate the
metallic portion.
Seat Opening Mechanism, Tab,
Hook and Lock Pin
All Models Except XP Limited
F01L7UY
1. Front tab
2. Rear mechanism
www.SeaDooManuals.net
-
CAUTION
2
1
67