Sea-doo GS5847 Operator's Manual page 51

1
F07J0NY
TYPICAL
1. Reverse gate in middle position
To obtain reverse position, pull shift le-
ver completely. The reverse gate will
be in downward position, deviating all
the thrust toward the front of the wa-
tercraft.
1
F02L3MY
GTS MODEL
1. Shift lever in reverse position
1
F07L0SY
GTI, GTX LIMITED AND GTX RFI MODELS
1. Shift lever in reverse position
F07J0OY
TYPICAL
1. Reverse gate in downward position
NOTE: To get maximum efficiency and
control from the reverse, increase en-
gine speed to just above idle.
In reverse position, turn the handlebar
the opposite direction that you want
to move the rear of the watercraft.
For example, to steer the rear of the
watercraft to the left side, turn the
handlebar to the right side.
F07A0CY
1. Handlebar turned to the right side
2. Rear of watercraft moving to the left side
Shift lever should only be used
when the engine is idling.
www.SeaDooManuals.net
1
1
WARNING
2
49