Sea-doo GS5847 Operator's Manual page 77

Locate MPEM on the left side of wa-
tercraft.
Remove fuse cover from the MPEM.
1
F06H1SY
TYPICAL
1. MPEM
2. Fuse cover
Use the tabs of the fuse cover to re-
move and reinstall fuses.
F06H1TY
1. Fuse cover
2. Fuse tabs
To access fuse in the electrical box,
proceed as follows:
Open the engine cover and remove
storage basket (XP Limited).
Remove seat (except XP Limited).
Remove vent tube support (GS and
GSX Limited).
Locate the electrical box.
Unclip and remove cover of the elec-
trical box.
2
1 2
www.SeaDooManuals.net
1
F06H1UY
GS AND GTI MODELS
1. Fuse holder
F07H0IY
GSX LIMITED, GTX LIMITED AND
XP LIMITED
1. Fuse holder
All Models
If defective, replace the fuse by one of
the same rating.
-
CAUTION
Do not use a higher rated fuse as
this can cause severe damage.
Refer to SPECIFICATIONS section
for recommended fuse rating. If a
fuse is regularly burnt, refer to an
authorized dealer.
WARNING
If any water is found in the elec-
trical box(es), immediately refer
to an authorized Sea-Doo dealer
before operating the watercraft.
1
75