Sea-doo GS5847 Operator's Manual page 67

Flooded Engine
If the engine does not start and it is
suspected to be flooded, proceed as
follows:
Remove spark plug cables and con-
nect them on the grounding device.
WARNING
Always use spark plug cable
grounding device when remov-
ing spark plugs.
Remove spark plugs and dry them us-
ing a rag.
Cover spark plug holes with a rag.
All Models Except GTX RFI and
GSX RFI
Install the safety lanyard cap on the
switch.
Ensure choke lever is completely
pushed in.
Depress and hold the throttle lever at
full throttle position.
Depress the start/stop button to crank
the engine approximately 10 seconds
to expell water from engine.
Reinstall spark plugs and connect ca-
bles.
Start engine normally.
GTX RFI and GSX RFI Models
Depress and hold the throttle lever at
full throttle position.
Install the safety lanyard cap on the
switch.
Depress the start/stop button to crank
the engine approximately 10 seconds.
Proceeding in this order, no fuel is in-
jected and the accumulated fuel in the
engine will be expelled.
Reinstall spark plugs and connect ca-
bles.
Start engine normally without applying
the throttle.
www.SeaDooManuals.net
65