Sea-doo GS5847 Operator's Manual page 46

10-HOUR INSPECTION CHECK LIST
Engine ignition timing if required
Spark plug inspection, cleaning and adjustment
Fuel system lines and fasteners/pressurization test
Carburetor adjustment including throttle/choke cables if required
Oil lines and filter
Oil injection pump adjustment if required
Engine support and engine rubber mounts
Muffler, battery and reservoir fastening devices
Exhaust system hose clamps
Throttle body and flame arrester base (RFI)
Carburetor flange nuts (or screws) and flame arrester bracket
Steering system inspection
Steering cable adjustment if required
Reverse cable adjustment if required (if applicable)
VTS adjustment if required (if applicable)
Cooling system hose condition and fasteners
Bailer pick-ups, check for obstructions
Fuel injection sensors verification (RFI)
Digitally Encoded Security System
Monitoring beeper
Electrical connections (starter, battery, etc.)
Jet pump oil replacement
PTO flywheel and seal carrier lubrication (if applicable)
Inspection of fasteners for tightness
Inspect/clean engine drain tube
Hull inspection
We recommend that this inspection chart be signed by an authorized dealer.
Date of 10-hour inspection
44
Authorized dealer signature
Dealer code
www.SeaDooManuals.net