Run Time Events; Configure Valves Menu - Thermo Scientific FOCUS GC Instruction Manual

Chapter 2
The FOCUS GC User Interface
Parameter
CONFIGURE VALVES
Valve #1
Valve #2
EV #1 default
EV #2 default

Run Time Events

This options allows you to program events to happen before to or during a run.
For instance, a valve could open two minute into a run.
You can program:
•
•
•
In Main Menu move the cursor until
Scroll to
The first time you program a time event (Run Time Events empty) the following
menu appears:
62
Table 2-13. Configure Valves Menu
Range
This line is the title bar.
None Select in this box Sampling only if a gas sampling valve
Gas Sampling is present and connected the GC. Otherwise, select
none.
The same as Valve # 1
On - Off Select the external event device default Condition. The
external device will return to the condition specified by
the external event you have programmed to be the
default whenever the GC is in Standby mode.
The same as EV #1
An output signal adjustment, such as autozero.
A valve to open or close.
An external event from another device.
Run time event
Description
page is selected, then press ENTER.
Others
then press ENTER.
OTHERS

Run Time Events

Run Time Events
Instruction Manual