Configuration Menu; Valves - Thermo Scientific FOCUS GC Instruction Manual

Chapter 2
The FOCUS GC User Interface

Configuration Menu

In Main Menu press the SCROLL DOWN key until the
press ENTER.
Scroll to
items in the
52
Configuration
Configuration
Menu
This line is the title bar.
CONFIGURATION
Controls preliminary actions such as an automatic prep
Oven
run, timeout, equilibration time.
Controls the type of carrier gas.
Carrier
Allow to select an external detector when the signal
Detector
coming from an external control module is desired.
This line is available ONLY if the FID board is present.
Controls the autosampler connected.
Autosampler
Visualizes the Main supply frequency.
General
Controls keypad and display preferences.
Keyboard and
Display
Configures the polarity of signals from external device.
Handshake
Sets the time and data.
Time
Controls the eventual gas sampling valve (when available).

Valves

.
OTHERS
Configuration
and press ENTER. The following table describes the
menu.
Table 2-3. Configuration Menu
Description

Configuration Menu

page appears, then
Others
Instruction Manual