Inlet; Carrier; Detector - Thermo Scientific FOCUS GC Instruction Manual

Chapter 2
The FOCUS GC User Interface

Inlet

Use this page to set inlet parameters such as temperature and split flow.
Refer to Chapter 5
Column Injector

Carrier

Use this page to display in the carrier menus vary with the pressure and flow
modes you select.
You have a choice of two flow modes:
•
•
Refer to Chapter 3

Detector

Use this page to display the detector menu:
Refer to Chapter 8
Conductivity Detector (TCD)
48
Split/Splitless Injector (S/SL)
(PPKD)for more information about Inlet menu options.
Constant pressure mode, which sets pressure only
Constant flow mode which maintains a specific flow rate through the column.
Gas Control
DETECTOR (FID)
Flame
Flame Ionization Detector (FID)
INLET
Temp 200 200
CARRIER
Pressure 100 100
for more information about Carrier menu options.
Off Filament power
for more information about Detector menu options.
User Interface Main Menu
or Chapter 6 Purged Packed
DETECTOR (TCD)
or Chapter 9 Thermal
Instruction Manual
Off