Power Plug And Cord - Konica Minolta FK-502 Service Manual

Power Plug and Cord

• When using the power cord set (inlet type) that came with this product,
make sure the connector is securely inserted in the inlet of the product.
When securing measure is provided, secure the cord with the fixture prop-
erly.
If the power cord (inlet type) is not connected to the product securely, a
contact problem may lead to increased resistance, overheating, and risk
of fire.
• Check whether the power cord is not stepped on or pinched by a table and
so on.
Overheating may occur there, leading to a risk of fire.
• Check whether the power cord is damaged. Check whether the sheath is
damaged.
If the power plug, cord, or sheath is damaged, replace with a new power
cord or cord set (with plug and connector on each end) specified by
KMBT.
Using the damaged power cord may result in fire or electric shock.
• Do not bundle or tie the power cord.
Overheating may occur there, leading to a risk of fire.
• Check whether dust is collected around the power plug and wall outlet.
Using the power plug and wall outlet without removing dust may result in
fire.
• Do not insert the power plug into the wall outlet with a wet hand.
The risk of electric shock exists.
• When unplugging the power cord, grasp the plug, not the cable.
The cable may be broken, leading to a risk of fire and electric shock.
SAFETY AND IMPORTANT WARNING ITEMS
WARNING
S 5
-