3. Set the stylus pen in the place shown in the illus-
tration.
4. Attach the supplied cord clamp to the scanner
rear cover of the machine. (One supplied screw
A)
Note:
• Only C364e/C284e/C224e needs this step.
• This may not be performed depending on the
applicable marketing area.
5. Attach the supplied connector cover to the
machine. (One supplied screw B)
6. Attach the supplied duct cover.
A5C1IXC007DA
X. Connecting the power cord
Note:
Steps 1 and 2 may be unnecessary depending on
the applicable marketing area.
1. Connect the power cord.
A161IXE047DA
2. Fit the supplied cord clamp over the power cord.
(One supplied screw C)
A161IXE065DA
E-10
A5C1IXC021DA
A161IXE042DA
A161IXE043DB