List Output - Konica Minolta FK-502 Service Manual

FK-502 Service Manual Ver.1.0
3.2.7

List Output

<Operational Procedure>
(1) See "3.1.3 How to Enter the Service Mode" to indicate the [Service mode setting] screen.
(2) Press the [FAX] key.
(3) Press the [List Output] key.
(4) Set the parameter setting.
(5) Press the [END] key to return Service Mode screen.
Parameter
Journal Diagnosis Code
Additionl
TX Result Report
Protocol Trace Auto Out-
put
A. Detailed Explanation
a. Journal DIagnosis Code Addition
• When set to "ON,"
- An error code is shown on the communication journal and the screen.
- The diagnosis code is printed on the communication journal.
b. TX Result Report
Even if set to "With Image" images are not attached at the time of the quick memory transmission and the
manual transmission.
Set Value
ON/OFF
With Image / Without
Image
Always / Error / OFF
FUNCTION PARAMETER SETTING
Factory-shipped
Default Setting
OFF Yes
Without Image Yes
OFF
Reference
3-19