Access Codes - Tadiran Telecom Emerald ICE User Manual

2.13
2-16
Emerald ICE Standard Telephone User Guide

Access Codes

p61
PGM
Feature Code:
Description
The Access Code feature allows you to store a four‐digit code so you can dial it by
pressing only one button. To operate, the Access Code must be stored on a
Feature/DSS Button. This feature is typically used to store a password for the voice
mail mailbox.
Storing a Code
1. While the telephone is idle, access Feature/DSS Button Programming (Refer
to Feature/DSS Button Programming in Section
Feature/DSS Button to be stored with your Access Code.
p61
PGM
2. Press
Using the Access Code
1. Access the voice mail system (either the Emerald ICE Voice or an external
voice mail system) by pressing the Feature/DSS Button designated as
VOICE MAIL (if programmed).
2. When you hear the prompt to enter your password, press the Access Code
button.
Operational Notes
• The Access Code feature can only be used when stored on a Feature/DSS But‐
ton.
+ {the four‐digit code to store}.
) and program a
2.12