Feature/Dss Button Programming - Tadiran Telecom Emerald ICE User Manual

Feature/DSS Button Programming

2.12
PGM
Feature Code:
Description
Emerald ICE Standard Telephones have 14 dual‐colored programmable
Feature/DSS Buttons. You can program any system feature code on any
Feature/DSS Button for one‐button operation. Certain programmed Feature/DSS
Buttons will light when activated (Do Not Disturb, Call Forward, DSS/BLF, etc.),
while others such as Call Pick‐Up, Background Music, Last Number Redial, do
not.
Features are separated into two distinct categories for programming onto Flexible
Buttons: Directory Numbers or Feature Codes.
1. While the phone is idle, press
2. Press the Feature/DSS Button that you want to program. When
programming, the red LED of the feature key being programmed will flash
slowly until programming is completed.
To program the button you must know the code number of the feature.
3. For a Directory Number press
4. For a Feature press
Operational Notes
• In some cases a user can program a Feature/DSS Button for a specific CO line
although access is restricted to that line via database programming. In this
situation, the telephone is still governed by database programming and
would still be unable to access the CO line if restricted.
• Any Feature/DSS Button programmed with a code previously assigned to a
different Feature/DSS Button will cause the previously programmed Fea‐
ture/DSS Button to become unassigned.
• Programmable Feature/DSS Buttons cannot be programmed for CO Line
Group operation when the system is configured for "Key" system operation.
p#3
PGM
1
2 p
PGM
+ + Feature Code +
Emerald ICE Standard Telephone User Guide
p#3
.
h
+ Directory Number+
h
.
.
2-15