Front Brake Master Cylinder - Suzuki GSX1400K2 Setup Manual

©
FRONT BRAKE MASTER CYLINDER
Remove the bolts and holder from the front brake
master cylinder.
A: Master cylinder
B: Boll
C:
Holder
Install the front brake master cylinder onto the han­
dlebars. Align the dot mark on the handlebars with
the master cylinder-to-holder fltting surface. Tighten
the master cylinder mounting bolts to the specif,ied
torque.
~ F,ront brake master cyJinde~ mounting bolt:
10 N·m (1.0 kgf-m)
NOTE:
To install the holder correctly, first tighten the
bolt
©
of the upper side with speci1ied torque
and then tighten the bolt @ of the lower side.
A: Holder D: Flange boll
8:
Master cylinder
E: Dot mark
C: Flange bolt
NOTE:
Install the holder according
10
the mark "UP".
NOTE:
Make sure that the ho'ider has no clearance at
the upper side as shown.
[CAUTIOfi]
I
Check for brake fluid [leakage.
A:
Bolt
C:
Master cylinder
B: Holder 0: Handlebars
Connect the front brake light switch lead wires cou ­
pler to the brake light switch.
A: Front brake light switch
B: Lead wire coupler
9