LEFT/GAUCHE/LINKS
RIGHT/DROIT/RECHTS
Before assembling the motorcycle, thoroughly
understand the "Safety Check Out" described on
page 46. After completion of assembly, carefully
check the motorcycle referring to the "Safety
Check Out", then deliver the motorcycle to the
customer.
ASSEMBLY
REMOVING THE BRACKET
Loosen the front brake and clutch master cylinder
bolts and remove the master cylinder from the
bracket.
NOTE:
Keep the front brake and clutch [master cylin
der with Its cap facing upwards until it is
installed.
A: Clutch master cylinder
B: Front brake master cylinder
C: Bolt
0: Bracket
Remove the bracket from the handlebar mounting
position.
NOTE:
The bracket and bolts 8're ,no longer needed
and these may be discarded.
A: Bracket
B: Bolt
HANDLEBARS
Insert the handlebar right switch and throttle assem
bly onto the handlebars.
A:
Throttle assembly
B: Right switch
C:
Handlebars
5