Answering A Call - Cisco 7962G User Manual

If you want to...
Place a call using a billing or
tracking code
(SCCP phones only)
Place a call using your Cisco
Extension Mobility profile
Make a call from a cellular
phone using Mobile Voice
Access

Answering a Call

You can answer a call by lifting the handset, or you can use other options if they are available on your
phone.
If you want to...
Answer with a headset
Answer with the
speakerphone
Switch from a connected call
to answer a new call
Answer using call waiting
Send a call to a voice message
system
Auto-connect calls
18
Then...
1. Dial a number.
2. After the tone, enter a client matter
code (CMC) or a forced
authorization code (FAC).
Log in to the Cisco Extension Mobility
service on a phone.
1. Dial your assigned Mobile Voice
access number.
2. Enter your cellular phone number (if
requested) and PIN.
3. Press 1 to make a call to an
enterprise IP phone.
4. Dial a desktop phone number other
than your desktop phone number.
Note Before using Mobile Voice Access
to make a call, obtain your Mobile
Voice Access number and End user
PIN from your system
administrator.
Then...
Press , if unlit. Or, if
lit, press Answer or
Press , Answer, or
Press Answer, or if the call is ringing
on a different line, press
Press Answer.
Press iDivert.
Use AutoAnswer.
For more information,
see...
Your system
administrator
Using Cisco Extension
Mobility, page 41
Using Cisco Extension
Mobility, page 41
For more information, see...
is already Using a Handset, Headset,
(flashing). and Speakerphone, page 44
(flashing). Using a Handset, Headset,
and Speakerphone, page 44
Using Hold and Resume,
(flashing). page 20
Using Hold and Resume,
page 20
Sending a Call to a Voice
Message System, page 24
Using AutoAnswer, page 45
OL-12644-01