Using Cisco Extension Mobility; Managing Business Calls Using A Single Phone Number - Cisco 7962G User Manual

Using Cisco Extension Mobility

Cisco Extension Mobility (EM) allows you to temporarily configure a Cisco Unified IP Phone as your
own. Once you log in to EM, the phone adopts your user profile, including your phone lines, features,
established services, and web-based settings. Your system administrator must configure EM for you.
If you want to... Then...
Log in to EM 1. Choose
2. Enter your user ID and PIN (provided by your system administrator).
3. If prompted, select a device profile.
Log out of EM 1. Choose
2. When prompted to log out, press Yes.
Tips
• EM automatically logs you out after a certain amount of time. Your system administrator
establishes this time limit.
• Changes that you make to your EM profile (from the User Options web pages) take effect the next
time that you log in to EM on a phone.
• Local settings controlled by the phone are not maintained in your EM profile.

Managing Business Calls Using a Single Phone Number

With Mobile Connect and Mobile Voice Access installed, you can use your cellular phone to handle
calls associated with your desktop phone number. A smartphone is a mobile phone with personal
computer capabilities such as web browsing, email, address book, and calendar.
If you want to...
Configure Mobile Connect
Answer a call using your
cellular phone
Switch an in-progress call
between your desk phone
and cellular phone
Cisco Unified IP Phone 7962G and 7942G for Cisco Unified Communications Manager 6.0 (SCCP and SIP)
> EM Service (name can vary).
> EM Service (name can vary).
Then...
Use the User Options web pages to set up remote destinations and
create access lists to allow or block calls from specific phone numbers
from being passed to the remote destinations. See
and Access Lists for Mobile Connect, page
See Answering a Call, page
See Switching an In-Progress Call to Another Phone, page
63.
18.
Advanced Call Handling
Setting Up Phones
22.
41