Cisco 7965G User Manual page 41

• Talk to the caller by pressing the active intercom button, and use either the handset, headset or
speaker. The intercom call becomes a two-way connection so that you can converse with the caller.
When using the intercom feature, be aware of the following:
• From an intercom line, you can only dial other intercom lines.
• You can use only one intercom line at a time.
• If you answer an intercom call while another intercom line is active, the first intercom call is dropped.
• When your active call is being monitored or recorded, you cannot receive or place intercom calls.
If you want to...
Place an intercom call to a
preconfigured intercom target
Place an intercom call to any
intercom number
Receive an intercom call
Cisco Unified IP Phone 7965G and 7945G for Cisco Unified Communications Manager 6.0 (SCCP and SIP)
Then...
Press (intercom target line) and, after you hear the
intercom-alert tone, begin speaking.
Press (an intercom line). Enter the intercom target number or
press a speed-dial number for your target. After you hear the
intercom-alert tone, begin speaking.
When you hear the intercom-alert tone, handle the call in one of these
ways:
• Listen to the message in one-way audio.
• Speak to the caller by pressing
• Press EndCall.
• The call then becomes a basic two-way call except that no
special features are available. You can stay in speakerphone
mode or go to handset or headset mode as you would with a
basic call.
(the active intercom line).
33