Cisco 7965G User Manual page 53

If you want to...
Make a call from your
cellular phone
Turn off Mobile Connect
from your cellular phone
Tips
• When calling Mobile Voice Access, you need to enter the number you are call from in addition to
the PIN if any of the following are true:
The number you are calling from is not one of your remote destinations.
–
The number is blocked by you or your carrier (shown as "Unknown Number").
–
The number is not accurately matched in the Cisco Unified Communications Manager
–
database; for example, if your number is 510-666-9999, but it is listed as 666-9999 in the
database, or your number is 408-999-6666, but it is entered as 1-408-999-6666 in the
database.
• If you incorrectly enter any requested information (such as cellular phone number or PIN) three
times in a row, the Mobile Voice Access call disconnects, and you are locked out for a period of
time. Contact your system administrator if you need assistance.
Cisco Unified IP Phone 7965G and 7945G for Cisco Unified Communications Manager 6.0 (SCCP and SIP)
Then...
See Placing a Call—Additional Options, page
1. Dial your assigned Mobile Voice access number.
2. Enter your cellular phone number (if requested) and PIN.
3. Press 3 to disable Mobile Connect.
4. Choose whether to turn Mobile Connect off for all configured
phones or just one:
All phones—Enter 2.
–
One phone—Enter 1 and enter the number you want to
–
remove as a remote destination, followed by #.
19.
45