Operating Precautions - Ikegami MLM-1582C Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS
4. Cleaning
1) Unplug this Color LCD Display equipment from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
2) Do not use thinners or petroleum products for cleaning. Otherwise, the cabinet may deform or the paint
may peel away .
5. Repair
1) Unplug this Color LCD Display monitor from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the Color LCD Display.
c. If the Color LCD Display monitor has been exposed to rain or water.
d. If the Color LCD Display does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the Color LCD Display monitor to normal operation.
e. If the Color LCD Display monitor has been dropped or the cabinet has been damaged.
f. When the monitor exhibits a distinct change in performance - this indicates a need for service.
2) When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacture that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock, or injury to persons.
3) Upon completion of any service or repairs to this monitor, ask the service technician to perform routine
safety checks to determine that the Color LCD Display is in safe operating condition.
4) For repair service, contact Ikegami's authorized sales representative or Ikegami service desk directly.

OPERATING PRECAUTIONS

1) Never let this unit fall or subject it to strong shock.
2) Do not remove the cabinet unless necessary. High-voltage parts are contained in the cabinet and they
are very dangerous if you touch then. Only qualified service engineers are allowed to adjust the internal
parts of the cabinet.
3) This color monitor has been adjusted to signals conforming to each broadcasting standard. It cannot be
used for signals of different broadcasting standards. Be sure to operate the colour monitor within the
voltage range marked on its back.
4) If cabinet or screen is dirty, wipe with soft cloth. At this time, avoid using petroleum based products or
thinner, otherwise the paint may peel away.
5) Note that, if video signals with high luminance are monitored on the LCD panel over a long period of
time, the panel may burn in the image.
6) Avoid using or storing this unit in the following places:
• Hot (+35ºC or more) or cold (+5ºC or less) places, especially where this unit may be exposed to
the direct rays of the sun.
• Humid and dusty places.
• Places where there is considerable vibration.
• Places exposed to rain or water.
• When storing or transporting this unit, pack it in the supplied carton or equivalent.
7) If no image can be monitored even after performing user adjustment or the unit appears faulty, do not
dismantle this unit by yourself. In such cases, contact the Ikegami service desk.
8) Should this unit fail within one year after delivery, it will be repaired free of charge unless the malfunction was
caused by mishandling or misuse of the user. However, the fuses are not covered by the warranty.
9) The specifications and appearance of this unit may be subject to change for further improvement without
prior notice.