Replacing The Lid Latches - Gateway MG1 Service Manual

Replacing the lid latches

v
88
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
Screws removed during this task:
2 black M2.5×3
(Keyboard cover)
To replace the lid latches:
1
Complete the steps in
2
Remove the keyboard cover by following the steps in
cover" on page
3
Open the LCD panel to the fully open position.
4
Remove the rubber inserts from the front of the LCD panel assembly.
Important
You can complete this procedure with the LCD panel assembly connected to
the notebook. LCD panel assembly shown removed from notebook for clarity.
Insert Insert
Insert
- OR -
6 black M2.5×8 (LCD
front panel)
"Preparing the notebook" on page
76.
Insert
Scribe or non-marring tool
2 black M2.5×5 (Lid
latches)
55.
"Replacing the keyboard
Insert
Insert