Gateway MG1 Service Manual page 95

5
Remove the screws from the front of the LCD panel assembly.
Screw Screw
Screw
6
Carefully separate the front and back of the LCD panel assembly.
7
Remove the screws that connect the lid latches to the LCD panel assembly.
Screw
8
Remove the old lid latches.
9
Install the new lid latches.
10
Replace the screws that were removed in
11
Press the LCD panel front and back together. Press the two halves together in several
places until they click in place. You should find no loose spots or spots where the
two halves do not meet.
www.gateway.com
Screw
Screw
Screw
Screw
Step 8.
89