Gateway MG1 Service Manual page 93

9
Remove the old webcam.
10
Install the new webcam.
11
Replace the screws that were removed in
12
Reconnect the webcam cable.
13
Press the LCD panel front and back together. Press the two halves together in several
places until they click in place. You should find no loose spots or spots where the
two halves do not meet.
14
Replace the LCD panel assembly screws removed in
15
Replace the rubber inserts removed in
16
Replace the keyboard cover by following the steps in
on page 76.
www.gateway.com
Step 8.
Step 5.
Step 4.
"Replacing the keyboard cover"
87