Gateway MG1 Service Manual page 83

6
Pull the cover off the notebook by lifting the back corners of the cover. Be careful
to not damage the LCD panel.
Caution
The cover is connected to the notebook by one or more cables. Do not pull
on the cables.
7
Slide the black clip to the back of the notebook, then slide the cable out of the clip.
Be careful not to touch or damage any other components.
8
Optional: Slide the white power button cable connector clip to the left of the
notebook, then slide the cable out of the clip. Be careful not to touch or damage
any other components.
Clip
9
Remove the old keyboard cover.
10
Optional: Make sure the white power button cable cover connector clip is fully
moved toward the left of the notebook, insert the new keyboard power button cable
into the connector, then slide the white clip to the right to lock the connector in place.
Important
The cable is correctly oriented if the blue side is down and the silver contacts
are up.
www.gateway.com
Clip
77