Sip Account Configuration Page Definitions - Grandstream Networks GXV3140 Application Manual

related to OpenVPN, including server address, port, OpenVPN CA, certificate and key. Additionally, the
user must also set the SIP account to use "VPN" for the "Nat Traversal" (under Account-> Network
Settings). Reboot the phone after these settings are saved for the changes to take effect. Once the phone
connects to the OpenVPN server and the authentication is correct, the phone will show the VPN IP
address under the Status-> Network Status, but it will still display the LAN IP on the LCD of the phone.

SIP ACCOUNT CONFIGURATION PAGE DEFINITIONS

The GXV3140 has three lines that can be configured to accommodate independent SIP accounts. Every
SIP account has an individual configuration page.
Account/General Settings
Account Active
Account Name
SIP Server
SIP User ID
Authenticate ID
Authenticate password
Voice Mail User ID
Name
User ID is phone
number:
Account/Network Settings
Outbound Proxy
Grandstream Networks, Inc.
Select YES to enable and use the Line.
The account name for the user that is displayed on the LCD screen.
The IP address of the SIP server or the given domain name of the VoIP service
provider.
User account information provided by the VoIP service provider; normally similar
to a telephone number or an actual telephone number.
The authenticate ID for the SIP user. It can differ or be the same as the SIP user
ID.
The password that the GXV uses to authenticate with the ITSP (SIP) server.
After it is saved, this will appear as blank for security reasons. The maximum
length is 25 characters.
When this is configured, the user can dial to the voicemail server using the
MESSAGE button. This ID is normally the feature code for Voice Mail.
The Caller ID that will be displayed for the account.
If the Video phone has an assigned PSTN number, this field should be set to
"YES". Otherwise, set it to "NO". If "YES" is set, a "user=phone" parameter will
be attached to the "From header" in the SIP request to indicate the E.164
number.
IP address or Domain name of the Outbound Proxy, or Media Gateway, or
Session Border Controller. Used by the GXV3140 for firewall or NAT penetration
in different network environments. If a symmetric NAT is detected, STUN will not
work and ONLY an Outbound Proxy will work.
GXV3140 USER MANUAL
FIRMWARE VERSION 1.0.3.10
Page 43 of 117
Updated : 12/2009