Sip Account Configuration Page Definitions - Grandstream Networks GXV3140 User Manual

Ip multimedia phone
Hide thumbs Also See for GXV3140:
Table of Contents

Advertisement

SIP ACCOUNT CONFIGURATION PAGE DEFINITIONS

The GXV3140 has three lines that can configure independent SIP accounts. Every SIP account has an
individual configuration page.
Account/Generic Settings
Account Active
Account Name
SIP Server
SIP User ID
Authenticate ID
Authenticate password
Voice Mail UserID
Name
User
ID
is
phone
number:
Account/Network Settings
Outbound Proxy
DNS Mode
NAT Traversal
GXV3140 USER MANUAL
SOFTWARE VERSION 1.0.0.44
Select YES to enable and use the Line.
The Account name for the user that is displayed on the LCD screen.
The IP address of the SIP server or the given domain name of the VoIP service
provider.
User account information provided by the VoIP service provider; normally similar
to a telephone number or an actual telephone number.
The authenticate ID for the SIP user. It can differ or be the same as the SIP user
ID.
The password that the GXV uses to authenticate with the ITSP (SIP) server.
After it is saved, this will appear as blank for security reasons. The maximum
length is 25 characters.
When this is configured, the user can dial to the voicemail server using the
MESSAGE button. This ID is normally the feature code for Voice Mail.
The Caller ID that will be displayed for the account.
If the Video phone has an assigned PSTN number, this field should be set to
"YES". Otherwise, set it to "NO". If "YES" is set, a "user=phone" parameter will
be attached to the "From header" in the SIP request to indicate the E.164
number.
IP address or Domain name of the Outbound Proxy, or Media Gateway, or
Session Border Controller. Used by the GXV3140 for firewall or NAT penetration
in different network environments. If a symmetric NAT is detected, STUN will not
work and ONLY an Outbound Proxy will work.
The default is set to A Record. If the user wishes to locate the server by DNS
SRV, the user may select SRV or NATPTR/SRV.
This setting decides whether the NAT traversal mechanism is activated. If it is set
to "Yes" and STUN server is configured, the GXV3140 will route according the
STUN server.
www.grandstream.com
support@grandstream.com

Advertisement

Table of Contents
loading

Table of Contents