As shown in the figure above, users can create, view and manage their messages. When the user presses
F3 to select "Options", the user can dial the number of the sender, save the number of the sender, or delete
the message(s).
When the user receives a message, the following notification will show up on the LCD screen:
Press F3 to Select OK. This will open the message for the user to view.
As shown in the figure above, the users can choose to "Reply", "Forward" or "Delete" the message.
Note:
•
Messages can be sent to more than 1 receiver. To send to multiple receivers, separate the
numbers with a semicolon (;). For example, send to three recipients (1331;1332;1333)
•
Currently, the maximum content length of the message is 128 characters.
Grandstream Networks, Inc.
GXV3140 USER MANUAL
FIRMWARE VERSION 1.0.3.10
Page 62 of 117
Updated : 12/2009