Call Transfer - Grandstream Networks GXV3140 Application Manual

2. Call Recover：Press the HOLD button again or press the "Resume" FUNCTION button to return to the
call. Users can also select the line placed on hold to resume the call.
3. Multiple Calls： Place the current call on hold, press the LINE button (
accept another call. When the line is busy the user hears a call waiting tone, notifying the user that a
call is waiting. Users may toggle between the multiple calls by pressing the Line button and select the
line they wish to answer.

CALL TRANSFER

1. Blind Transfer: Press the "CALL TRANSFER" button (
phone will display the following message: "Dial Number (Blind) OR Select Line (Attended)". (See
Figure below). Dial the extension number and press F3 for "SEND". This will transfer the call to the
other party immediately.
2. Attended Transfer: Press the "LINE" button (
transfer; this will place the other party on hold immediately. Dial the number that you wish to transfer to
and after confirmation from the party, press the "CALL TRANSFER" button. The phone will display the
following message: "Dial Number (Blind) OR Select Line (Attended)". (See figure below). Press the
"LINE" button and select the line on hold.
Grandstream Networks, Inc. GXV3140 USER MANUAL
FIRMWARE VERSION 1.0.3.10
) to select another line or
) to place the other party on hold. The
) to select an idle line to use for attended
Page 27 of 117
Updated : 12/2009