Grandstream Networks GXV3140 Application Manual page 94

configure the Wifi Network settings. Press "Configure" to configure the ESSID (See figure below), this
would bring up a Wifi ESSID configuration page and users can press "Scan" to scan for the available
ESSID. The available ESSID will be shown in the table on the left, and users can select their wireless
network from this list and press the OK button to submit. If the ESSID is not shown in the table below,
the users could add the ESSID manually using the "Add" function on the right.
After the user selects the ESSID, return to the Wifi menu to configure the wireless network security
mode and key. After the user saves the settings, the phone should be able to connect to the Wifi
) will be
network if the authentication credentials are correct. The Wifi network strength icon (
displayed on the LCD. The users can access the network settings on the phone to view the current IP
address and various other network settings.
Grandstream Networks, Inc. GXV3140 USER MANUAL Page 94 of 117
FIRMWARE VERSION 1.0.3.10 Updated : 12/2009