Advanced Settings Page Definitions - Grandstream Networks GXV3140 Application Manual

ADVANCED SETTINGS PAGE DEFINITIONS

Advanced Settings/General Settings
Local RTP Port
Use Random Port
Keep-alive Intervals (s)
STUN Server
Use NAT IP
SSL Certificate
SSL Private Key
SSL Private key
Password
Advanced Settings/Call Features
Disable Call-Waiting
Disable Call-Waiting
Tone
Disable Direct IP Call
Offhook Auto Dial
Advanced Settings/Video Settings
Grandstream Networks, Inc.
This parameter defines the local RTP-RTCP port pair used to listen and transmit.
It is the base RTP port for channel 0. When configured, for audio, channel 0 will
use this port _value for RTP and the port_value+1 for its RTCP; channel 1 will
use port_value+4 for RTP and port_value+5 for its RTCP. For video, channel 0
will use port_value+2 for RTP and port_value+3 for its RTCP; channel 1 will use
port_value+6 for RTP and port_value+7 for RTCP. The default value is 5004
When set to YES, this parameter will force random generation of both the local
SIP and RTP ports. This is usually necessary when multiple GXV-3140s are
behind the same full cone NAT. The Default setting is YES. (This parameter must
be set to NO before Direct IP Calling will work)
This parameter specifies how often the GXV-3140 sends a blank UDP packet to
the SIP server in order to keep the "ping hole" on the NAT router to open. The
default setting is 20 seconds.
The IP address or Domain name of the STUN server. STUN resolution results
are displayed in the STATUS page of the Web UI. Only non-symmetric NAT
routers work with STUN.
Default STUN server: stun.ipvideotalk.com
The NAT IP address used in SIP/SDP messages. This field is blank at the default
settings. This should ONLY be used if your ITSP requires it.
This defines the SSL certificate needed to access certain websites.
This defines the SSL Private key.
This defines the SSL private key password.
The default setting is No. If set to Yes, the call waiting feature will be disabled.
The default setting is No. If set to Yes, the call waiting tone will be disabled.
The default setting is No. If set to Yes, Direct IP calling will be disabled.
Configure a User ID/extension to dial automatically when the phone is taken
offhook. By default, the phone will use the first account to dial out.
GXV3140 USER MANUAL
FIRMWARE VERSION 1.0.3.10
Page 35 of 117
Updated : 12/2009