Grandstream Networks GXV3140 Application Manual page 48

Early Dial
Refer to Use Target
Contact
Auto Answer
Send Anonymous
Anonymous Call
Rejection
Special Feature
Enable Call Features
Call Forward
Unconditional
Call Forward When
Busy
Call Forward When No
Answer
Delayed Call Forward
Wait Time (s)
No Key Entry Timeout
(s)
Ring Timeout (s)
Grandstream Networks, Inc.
• <=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by
dialing
7 numbers and 1617 area code will be added automatically
• 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11 digits
length
• 011[2-9]x. - allows international calls starting with 011
• [3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911
Note: In some cases where the user wishes to dial strings such as *123 to
activate voice mail or other applications provided by their service provider, the *
should be predefined inside the dial plan feature. An example dial plan will be:
{ *x+ } which allows the user to dial * followed by any length of numbers.
The default setting is NO. Use only if the proxy supports 484 response.
The default is NO. If set to YES, then for Attended Transfer, the "Refer-To"
header uses the transferred target's contact header information.
The default setting is NO. If it is set to YES, the GXV3140 will play a "beep"
sound and answer the phone automatically on the speaker.
If set to YES, the "From" header in the outgoing SIP messages will be set to
anonymous to block the caller ID from displaying. The default setting is NO.
The default setting is NO； If set to YES， any anonymous call will be rejected （with
486Busy message）
Different soft switch vendors have special requirements; therefore users may
need to select special features to meet these requirements. Users can choose
from Standard, CBCOM, and RNK depending on their need.
The default setting is Standard.
The default is set to YES. If it is set to NO, call features are disabled.
Sets the number to forward to unconditionally.
Sets the number to forward to when busy.
Sets the number to forward to when no answer.
The wait time before transferring the call to another extension or to voicemail;
the default setting is 20 seconds.
Defines the time out duration on no key entry.
Default setting is 4 seconds.
Defines the time out duration on no answer.
Default setting is 60 second.
GXV3140 USER MANUAL
FIRMWARE VERSION 1.0.3.10
Page 48 of 117
Updated : 12/2009