Grandstream Networks GXV3140 Application Manual page 41

Maintenance/Debug
Capture Trace
View Trace
Enable Application
Debug
Maintenance/Language
Language
Maintenance/Device Manager (LCD)
Screen Saver Timeout
(m)
Screen Saver Interval
(s)
LCD Auto Power Off
Time (m)
Maintenance/Device Manager (Headset)
Headset TX Gain (dB)
Headset RX Gain (dB)
Maintenance/Device Manager (Camera)
Grandstream Networks, Inc.
Registration status change (INFO level)
Negotiated codec (INFO level)
Ethernet link up (INFO level)
SLIC chip exception (WARNING and ERROR levels)
Memory exception (ERROR level).
Press START to start capturing a trace, and press STOP to abort the capture
process.
Press LIST to view the list of captured traces. It will show the time the trace was
captured. Click on the name of the file to download and view the trace.
When set to YES, the trace captured will contain debug messages.
The default setting is NO.
Selects the language setting for the phone.
This sets the lapsed idle time needed for the screen saver to appear. The default
setting is 5 minutes.
The screen saver is a picture slide show. This defines the frequency to change
the picture on the screen for the screen saver.
The default setting is 10 seconds.
This defines the lapsed idle time needed for the LCD to power off automatically
in order to save power. The default setting is 15 minutes.
Transmission gain. It's a headset setting to control the voice intensity. The
default setting is 0dB.
Receive gain. It's a headset setting to control the voice intensity. The default
setting is 0dB.
GXV3140 USER MANUAL
FIRMWARE VERSION 1.0.3.10
Page 41 of 117
Updated : 12/2009