During Calls; Answering Calls; Call Hold/Waiting - Grandstream Networks GXV3140 Application Manual

DURING CALLS

ANSWERING CALLS

1. Single Incoming call: When the phone rings, you can use the headset, handset or speaker to answer
the call. The user may also press the SPEAKER button (
button for "Accept" on the LCD screen. (See figure below)
2. Multiple Incoming Calls: The user will hear a call waiting tone and the LCD displays the number of
the caller. At this moment, press the corresponding FUNCTION button for "Accept" to establish a
connection with the new caller. This will put the previous call on hold, and users may press LINE
button ( ) to see the status of each line and to switch between the lines
3. Auto-Answer/Paging/Intercom: After the phone makes a "beep" sound, the call is automatically
established through the speaker. (The phone should be configured to enable "Auto Answer" or
"Paging/Intercom". Support from PBX / IP-PBX is also required)

CALL HOLD/WAITING

1. Call Hold：Press the HOLD button (
on the screen (See figure below).
Grandstream Networks, Inc.
) to place the call on hold. The following will be displayed
GXV3140 USER MANUAL
FIRMWARE VERSION 1.0.3.10
) or the corresponding FUNCTION
Page 26 of 117
Updated : 12/2009