Table of Contents
Advertisement
Figure 15. Installing the camera assembly
Pawl
and mates with the orange alignment tab,
and mates with the white alignment tab.
Counter-
clockwise
(as seen
from below)
to remove
Landings (2)
Pawls (2)
Landing
Alignment slots (2):
One is orange
and one is white
Alignment tabs (2):
One is orange on the inside
and mates with the orange alignment slot, and
one is white on the inside
and mates with the white alignment slot.
Interconnect
card socket
Heaters are hot. Do not touch.
CAUTION
CAUTION
To remove the camera assembly:
Just push up, twist the camera assembly
counterclockwise, and lower it when the pawls
are released from their landings.
Note:
You need not stop the camera's
movement before reaching up and
removing the camera assembly.
Upper bracket
Standoff posts (3)
Safety lanyard
Camera assembly
Standoff notches (3)
21
Advertisement
Table of Contents
