Installing The T-Bar Ceiling Support Kit - GE Legend Installation Manual

Ge security legend ptz dome camera installation manual
Hide thumbs Also See for Legend:
Table of Contents

Advertisement

36
Legend
Installation Manual
Figure 36. Parts of a supported T-bar ceiling

Installing the T-bar ceiling support kit

One side of the ceiling ring is flat. The other side has two press nuts. Orient the ceiling ring as directed in the
instructions.
CAUTION
CAUTION
See the corresponding figures and do the following:
1. Remove the removable ceiling panel where the flush housing will be installed.
2. Center the angle brackets and ceiling ring
(flat side to the brackets) on the removable
ceiling panel aligning their center mounting
holes.
Ceiling T-bars
For all installations, heed these cautions:
• Complete all installation steps before supplying power to the dome.
• To ensure proper operation of a PTZ unit, install the mount level.
• For safety, the mounting surface, hardware, and procedure used for securing the dome must
support the weight of the dome, mount, cables, and any structural or environmental vibration
according to local codes.
Angle brackets (provided with kit)
Ceiling ring (provided with kit)
Removable ceiling panel
Figure 37. Aligning the angle brackets and ceiling ring on the panel
Angle
brackets
Ceiling
ring
Removable
ceiling
panel
Center
mounting
holes of
ring and
brackets

Advertisement

Table of Contents
loading

Table of Contents