GE Legend Installation Manual page 27

Figure 16. Attaching the bubble to the housing (cameras not shown to show safety clips clearly)
Flush-mount housing
Flush-mount housing and bubble ring
and bubble ring
Safety clip
Safety clip
Safety cable
Safety cable
Cast aluminum (rugged) pendant-mount housing
Cast aluminum (rugged) pendant-
mount housing and bubble ring
and bubble ring
Tamper-resistant
Tamper-resistant
threaded captive
threaded captive
bubble screws (6)
bubble screws (6)
Note: Use the provided
Torx-pinned bit.
Plastic pendant-mount housing and bubble ring
Cameras not shown
in diagrams
so that safety clips
are clearly visible.
Self-locking, quarter-turn
Self-locking, quarter-turn
captive bubble screws (3)
captive bubble screws (3)
Self-locking, quarter-turn
Self-locking, quarter-turn
captive bubble screws (3)
captive bubble screws (3)
Do not use a power
CAUTION
CAUTION
drill with the self-
locking, quarter turn
captive screws.
around the bubble ring)
around the bubble ring)
Safety clip Safety clip
Bubble slots (2)
Bubble slots (2)
Safety cable Safety cable
Bubble tabs (2)
Bubble tabs (2)
Plastic pendant-mount housing
and bubble ring
O-ring
O-ring
(ensure it is in place
(ensure it is in place
Heavy duty housing and bubble ring
Heavy duty housing
and bubble ring
Safety clip
Safety clip
Safety clip
Safety clip
Safety cable
Safety cable
Safety sable
Safety cable
Keylock latch
Keylock latch
23