Indications For Removal / Disposalof Waste Material - Sole Diesel MINI 17 Instruction Manual

4.2.3 REFUELING
Always use clean, filtered gas oil. Never use either kerosene or heavy oils. On topping up with fuel, use a funnel with a
metallic mesh filter, to keep out impurities or foreign bodies which may cause problems in the fuel injection circuit.
Whenever possible, keep the fuel tank full, as temperature changes may cause condensation of the damp air present in
the tank so that water accumulates at the bottom, giving rise to corrosion or making it impossible to start the engine if this
is aspirated by the fuel pump.
Check all tank filling plugs located at the boat deck are sealed..
warning!
Do not use dieselfuel mixed with water orany other foreingsubstances
warning!
Always use top quality fuel of certified origin. the use of dieselfuel that does not comply with the technical
specifications indicated above will cause serious damage to the injection system and hence to the engine and
also invalidate the terms of the guarantee
4.3 INSTALLATION
warning!
When water-cooled engines must be located in an enclosed place or protected by guards or a cabinet, it is
important to ensure thatcombustion air is freely supplied and freely expelled from the area
The above recommendation is of primary importance in relation to the perfect operation of the engine because the hot air that
it generates must never be routed to the area of the combustion air intake cleaner.
If the users fails to take these precautions, a hot air recirculation system will be formed thus reducing engine power output and
obstructing proper cooling.
In these cases it is advised to take steps to avoid taking in engine combustion air from the place in which the engine is
installed. This is achieved by placing the suction filter, or a suction prefilter, outside the place in which the engine is installed.

4.4 INDICATIONS FOR REMOVAL / DISPOSALOF WASTE MATERIAL

warning!
Disposal of waste material must be carried outin conformity withestablished legislation inthe country of installation.
ENG - 19
03917700.ENG rev. 0