Motorola Netopia Administrator's Handbook page 28

Administrator's Handbook
Any WEP-enabled client must have an identical key of the same length as the Gateway, in order to successfully
receive and decrypt the traffic. Similarly, the client also has a 'default' key that it uses to encrypt its transmissions.
In order for the Gateway to receive the client's data, it must likewise have the identical key of the same length.
WPA-PSK
One of the easiest ways to enable Privacy on your Wireless network is by selecting WPA-PSK (Wi-Fi Protected
Access) from the pull-down menu.
◆
Enter a Passphrase. The key can be between 8 and 63 characters, but for best security it should be at least
20 characters.
◆
You also have the choice of applying Both WPA Version 1 and 2, WPA Version 1 Only, or WPA Version 2
Only from the pull-down menu. These can be applied to each SSID individually.
When you have finished, click the
Wireless Multiple SSIDs
This feature allows you to add additional network identifiers (SSIDs or Network Names) for your wireless network.
To enable Multiple SSIDs, click the
The Wireless Multiple IDs screen appears to allow you to add up to three additional Wireless IDs.
◆
When the Multiple Wireless SSIDs screen appears, check the SSID Enable checkbox for each SSID you want
to enable.
◆
The screen allows you to name each additional Wireless ID.
When you have finished, click the
28
Apply Changes
button.
Multiple SSID
link.
Apply Changes
button.