Subnets & Dhcp - Motorola NVG510 Administrator's Handbook

Link: Subnets & DHCP
Subnets & DHCP
link, the Subnets & DHCP page appears.
When you click the
The Server configuration determines the functionality of your DHCP Settings. This functionality enables the Gate-
way to assign your LAN computer(s) a "private" IP address and other parameters that allow network communica-
tion. This feature simplifies network administration because the Gateway maintains a list of IP address
assignments. Additional computers can be added to your LAN without the hassle of configuring an IP address.
This is the default mode for your Gateway.
Private LAN Subnet
Device IP Address: The IP address of your Gateway as seen from the LAN
N
Subnet Mask: Subnet mask of your LAN
N
DHCP Start Address: First IP address in the range being served to your LAN by the Gateway's DHCP server
N
DHCP End Address: Last IP address in the range being served to your LAN by the Gateway's DHCP server
N
Public Subnet
Public Subnet Enable: If you select On from the pull-down menu, you can enable a second subnet to distrib-
N
ute public addresses to DHCP clients.
Routed Network: If Public Subnet Enable is checked, this selection permits you to specify Gateway Selec-
N
tion by the Gateway Router IP Address or its Router Name.
Delegated Gateway: The IP address for a router set up behind this Gateway, if one is used.
N
Public IPv4 Address: The IP address of your Gateway as seen from the WAN
N
Subnet Mask: Public subnet mask
N
DHCPv4 Start Address: First IP address in the range being served from a DHCP public pool.
N
DHCPv4 End Address: Last IP address in the range being served from a DHCP public pool.
N
41