Table of Contents
Advertisement
Administrator's Handbook
show wireless [ all ]
Shows wireless status and statistics.
show wireless clients [ MAC_address ]
Displays details on connected clients, or more details on a particular client if the MAC address is added as an
argument.
telnet [ hostname | ip_address ] [ port ]
Lets you open a telnet connection to the specified host through your Motorola Netopia® Gateway.
◆
The
hostname
argument is the name of the device to which you want to connect; for example,
ftp.netopia.com
◆
The
ip_address
connect.
◆
The
port
argument is the number of t he port over which you want to open a telnet session.
traceroute ( ip_address | hostname )
Traces the routing path to an IP destination.
upload [ server_address ] [ filename ] [ confirm ]
Copies the current configuration settings of the Motorola Netopia® Gateway to a TFTP (Trivial File Transfer Proto-
col) server. The TFTP server must be accessible on your Ethernet network. The
identifies the IP address of the TFTP server on which you want to store the Motorola Netopia® Gateway settings.
The
filename
argument identifies the path and name of the configuration file on the TFTP server. If you
confirm
include the optional
the operation.
view config
Dumps the Motorola Netopia
who
Displays the names of the current shell and PPP users.
WAN Commands
atmping vccn [ segment | end-to-end ]
Lets you check the ATM connection reachability and network connectivity. This command sends five Operations,
Administration, and Maintenance (OAM) loopback calls to the specified vpi/vci destination. There is a five second
total timeout interval.
Use the segment argument to ping a neighbor switch.
Use the end-to-end argument to ping a remote end node.
reset dhcp client release [ vcc-id ]
Releases the DHCP lease the Motorola Netopia
specified DSL port. The
62
.
argument is the IP address, in dotted decimal notation, of the device to which you want to
keyword, you will not be prompted to confirm whether or not you want to perform
®
Gateway's configuration just as the
®
vcc-id
identifier is an "index" letter in the range B-I, and does not directly map to the
view
command does in config mode.
Gateway is currently using to acquire the IP settings for the
telnet
server_address
argument
Advertisement
Table of Contents
